基于高斯两步移动搜寻法的村镇避难场所可达性研究     

但文羽  肖映辉  胡周灵  詹庆明 《地球信息科学学报》2018,20(10):1412-1421

避难场所可达性是指避难场所与受灾居民之间的通达性,即灾害发生时,避难人员通过避难疏散通道到达避难场所的难易程度,是评价避难场所布局合理性的重要指标。本研究结合高斯两步移动搜寻法和网络分析法,从供需双向出发对村镇地区避难场所进行可达性分析。2种方法的结合,既充分考虑了需求点与设施点的相互作用,又充分考虑了设施点的吸引力随距离的衰减关系,并基于实际道路,以步行疏散时间作为搜索半径,降低了传统研究中因忽略供需间相互作用及实际距离而引起的可达性结果的误差。最后,以神农架松柏镇区为例,验证该方法的实际应用价值。结果表明,该方法能够有效测定村镇地区避难场所的空间可达性,同时,基于GIS软件可以直观地揭示研究区域内避难场所可达性空间分布差异。该方法可为制定科学的村镇防灾减灾规划提供方法支持。  相似文献   

基于随机森林特征选择的城市绿化乔木树种分类     

温小乐  钟奥  胡秀娟 《地球信息科学学报》2018,20(12):1777-1786

城市绿化在改善空气、水和土壤质量,吸收和减少二氧化碳及各种污染物,缓解城市热岛和减少雨水径流等方面发挥着重要作用。及时准确地获取树种信息是城市规划与绿化管理的先决条件,对进一步改善城市生态环境也具有重要意义。基于遥感技术,使用高空间分辨率的WorldView-2卫星影像,采用光谱、纹理、指数以及几何等多种特征相结合的面向对象方法,并通过随机森林进行特征选择,对福州大学旗山校区北部的榕树、杧果、香樟、重阳木、羊蹄甲、垂叶榕以及木棉7种主要绿化乔木进行树种分类。实地验证结果表明：通过特征选择可以减少或规避数据冗余以及休斯效应的产生,该方法可以提高现有同类型树种分类的精度,当淘汰全部特征的20%,利用34个特征（包括15个光谱特征、6个纹理特征、8个指数特征和5个几何特征）进行分类时,总精度最高,可达74.95%,Kappa系数为0.67。其中,光谱平均值的特征重要性最高,而各波段的标准差的重要性较低。WorldView-2卫星影像的4个新增波段,特别是黄光和红边波段及其构建的指数特征重要性较高,也说明这些波段在植被遥感,特别是树种分类中极具应用前景。  相似文献   

DFT对Rb⁺水合团簇及其相关性质的分析          下载免费PDF全文

张文倩  葛蒲  房春晖  周永全  朱发岩  刘红艳  李武 《盐湖研究》2019,27(3):81-92

运用密度泛函理论(DFT)在ωB97XD/gen (O、H元素Aug-cc-PVDZ; Rb元素Lanl2DZ)基组水平上研究了[Rb(H_2O)_n]~+(n=1～12)水合团簇的结构和光谱学性质。研究结果表明,通过分析气相和液相中的稳定能以及水合团簇可知,稳定构型出现在8配位的团簇中。第一配位层水分子数为8时形成Rb~+第一近似饱和水合层。此外,拉曼光谱显示[Rb(H_2O)_n]~+(n=1～12)水合团簇中O-H伸缩振动峰随着水分子数增加发生移动和加宽,Rb~+发生水合时,O-H对称和非对称伸缩振动发生红移,随着水合数的增多,频率蓝移。此外,文中对拉曼光谱中O-H振动的频率位置结合团簇结构进行了说明。  相似文献   

大陆架科学钻探CSDP-2井的垂直地震剖面测量   总被引：1，自引：0，他引：1       下载免费PDF全文

吴志强  祁江豪  张训华  郭兴伟  丘学林  张雪飞  谭云龙  黄聿晓  李文强  庞玉茂 《地球物理学报》2019,62(9):3492-3508

南黄海海相地层的地震波场特征和层位标定一直是困扰地震勘探的重要问题.为了近距离、高精度和高分辨率地观测井周围构造特征和岩石性质引起的波场变化，为地震资料的采集、处理与解释提供地震波衰减规律、速度与层位标定等信息，对大陆架科学钻探CSDP-2井实施了近零偏移距垂直地震剖面（VSP）观测.针对海相地层顶部强反射界面地震波穿透难的问题，采用了大容量气枪震源并设计了气枪阵列组合方式，提高了激发地震波的能量，获得了强反射界面之下清晰的PP、PS下行波和上行波信号.采用了三分量偏振合成、组合滤波和波场分离等处理方法，对VSP观测数据进行处理，获得了海相三叠系—志留系的精细的纵波、横波速度结构和地层吸收因子等物性数据，建立了钻井地层、测井、VSP上行波和多道地震剖面对应关系，实现了不同尺度的地质和地球物理属性资料的有效衔接，标定了钻井地质剖面上各深度地质体的地震反射特性，厘定了过井地震剖面上反射同相轴的地质属性.此次观测取得的纵波、横波速度信息，成为建立南黄海海相地层速度模型主要的资料来源，也是地震资料的岩性反演处理不可缺少的信息.  相似文献   

Geoprobe直推式土壤钻机在涌砂层中的应用          下载免费PDF全文

彭新明  周国庆  李安  佟雪健  郭永岩  薛洪林  白江伟 《探矿工程》2020,47(5):60-64

本文介绍了Geoprobe7822DT、Geoprobe 8040DT、Geoprobe 3230DT三种型号直推式土壤钻机的结构、主要特点和应用情况，并与其他类型功能相近的取样钻机的使用效果进行了对比，分析了Geoprobe直推式土壤钻机在涌砂层钻进中存在护壁功能不足、整体稳定性较差、钻杆易损等主要问题，并对直推式土壤钻机后续的改进和使用提出了建议。  相似文献   

季冻土区临水内、外拱护墙结构冻胀特征分析及治理     

孙洪伟  翟利杰  任望忠  傅汝进 《吉林大学学报(地球科学版)》2020,50(6):1833-1843

为厘清季冻土区临水内、外拱护墙结构冻胀平位移冻害机理，测试隔离层防冻害装置的有效性，在20101110-20110531、20131110-20140531、20171110-20180531三个观测年内，以长春某湖泊临水内、外拱护墙结构为研究对象，选择内、外拱护墙结构和设隔离层防冻害装置的试验内拱护墙结构三者相对比，用钢尺量距法观测三者寒期的平位移状态。结果表明：内拱护墙结构出现倾斜、裂缝导致的内向冻胀平位移冻害，其内向平位移曲线随气温均呈"半驼峰型"，对应观测年持续降温-持续低温-持续升温-正温时段，内向冻胀平位移呈减小-增大-减小-稳定残余的位移运动，诱因是平冻胀应力的生成-增长-减弱-消失作用；外拱护墙结构出现较小的外向冻胀平位移，外向冻胀平位移曲线均呈"波浪型"，无冻害发生，冰凸拱平冻胀应力推动外拱护墙结构压缩冻土凹拱形成外向冻胀平位移，冻土凹拱限制了外向冻胀平位移发展；设隔离层防冻害装置的试验内拱护墙结构未发生平位移冻害，其内向冻胀平位移较自然冻胀的内拱护墙结构减小83.92%，较外拱护墙结构减小51.74%，表明隔离层防冻害装置防治冻胀平位移冻害有效。  相似文献   

GF-2支持下的干旱区稀疏植被区植被覆盖度估算     

沈谦  朱长明  张新 《测绘通报》2019,(7):33-38

现有像元二分模型MODIS植被覆盖度模型因其形式简单、适用性较强的特点被广泛应用于区域植被覆盖度（FVC）的估算。然而，研究表明在沙漠和低植被覆盖的西部干旱区，从250 m的影像上很难精准地获取NDVI_veg（全植被覆盖植被指数）和NDVI_soil（全裸土区植被指数）参数。利用常用的直方图累计法获取模型所需参数NDVI_veg和NDVI_soil，估算结果存在普遍高估现象。为此，本文首先引入同期获取的GF-2号卫星数据，从GF-2号影像上提取植被覆盖像元；然后，利用Pixel Aggregate方法重采样至250 m分辨率，获取250 m空间分辨率下纯植被和纯裸土像元；最后，将纯植被和纯裸土像元各自空间位置相对应的MODIS NDVI数据最大值作为模型所需NDVI_veg和NDVI_soil参数，实现研究区内植被覆盖度的估算。试验通过与线性回归法、多项式回归法和直方图累计像元二分模型法估算结果进行精度对比，结果表明：利用GF-2影像辅助的像元二分模型，精准地获取了低植被覆盖区NDVI_veg和NDVI_soil模型参数，提高了干旱区植被覆盖度的估算精度，并有效地抑制了受稀疏植被影响NDVI在干旱区普遍偏高问题导致的FVC高估的现象。  相似文献   

高分二号卫星影像自适应模糊阈值法小波去噪     

张宇航  杨武年  任金铜  邓晓宇 《测绘通报》2019,(3):32-35

高分二号卫星影像提供了丰富的图像信息，高分二号影像数据的发布打破了我国高分辨率对地观测数据长期依赖进口的局面。但是图像在传输和保存过程中会有噪声干扰，如果感兴趣区域受到污染，则会导致该区域内的影像信息不能被充分利用。为了解决高分二号遥感影像去噪这一难题，本文采用自适应模糊阈值法去噪方式，该方法根据各个尺度下噪声方差建立的自适应模糊阈值函数非线性处理后，重新构造作为新的小波系数，经小波逆变换后得到去噪图像。通过与均值滤波器滤波、高斯平滑滤波、中值滤波器滤波、小波全局阈值去噪和Birge-Massart策略阈值法去噪比较，结果表明，自适应模糊阈值去噪法充分结合软硬阈值处理方式的优点，既保留图像细节又使图像更加平滑，图像整体信息完好，去噪效果更为理想。  相似文献   

Revisiting the morphological method in two-dimensions to quantify bed-material transport in braided rivers     

Gilles Antoniazza  Maarten Bakker  Stuart N. Lane 《地球表面变化过程与地形》2019,44(11):2251-2267

Research in the 1990s showed that bed-material transport rates could be estimated at the reach scale in both one-dimension and, over small spatial scales (10s of m), in two-dimensions. The limit on the latter was the spatial scale over which it was possible to obtain distributed data on morphological change. Here, we revisit the morphological method given progress in both topographical data acquisition and hydraulic modelling. The bed-material transport needed to conserve mass is calculated in both one and two dimensions for a 1600 m × 300 m Alpine braided river “laboratory”. High-resolution topographical data were acquired by laser scanning to quantify Digital Elevation Models (DEMs), and morphological changes caused by the flushing of the water intake were derived from repeated surveys. Based on DEMs of differences, 1D bed-material transport rates were calculated using the morphological method. Then, a 2D hydraulic model was combined with a topographic correction to route sediment through the network of braided channels and to obtain a spatially variable estimate of transport in both downstream and cross-stream directions. Monte Carlo simulation was applied to the routing model parameters, allowing identification of the most probable parameter values needed to minimize negative transport. The results show that within-section spatial compensation of erosion and deposition using the 1D treatment leads to substantial local errors in transport rate estimates, to a degree related to braiding intensity. Even though the 2D application showed that a large proportion of the total transport was actually concentrated into one main channel during the studied low flow event, the proportion of transport in secondary anabranches is substantial when the river starts braiding. Investigations of the effects of DEM resolution, competent flow duration and survey frequency related to ‘travelling bedload’ and sequential erosion-deposition emphasized the critical importance of careful data collection in the application of the morphological method. © 2019 John Wiley & Sons, Ltd.  相似文献   

Tectono-sedimentary evolution of Jurassic–Cretaceous diapiric structures: Miravete anticline,Maestrat Basin,Spain     

Jaume Vergés  Yohann Poprawski  Ylènia Almar  Peter A. Drzewiecki  Mar Moragas  Telm Bover-Arnal  Chiara Macchiavelli  Wayne Wright  Grégoire Messager  Jean-Christophe Embry  David Hunt 《Basin Research》2020,32(6):1653-1684

Integration of extensive fieldwork, remote sensing mapping and 3D models from high-quality drone photographs relates tectonics and sedimentation to define the Jurassic–early Albian diapiric evolution of the N–S Miravete anticline, the NW-SE Castel de Cabra anticline and the NW-SE Cañada Vellida ridge in the Maestrat Basin (Iberian Ranges, Spain). The pre shortening diapiric structures are defined by well-exposed and unambiguous halokinetic geometries such as hooks and flaps, salt walls and collapse normal faults. These were developed on Triassic salt-bearing deposits, previously misinterpreted because they were hidden and overprinted by the Alpine shortening. The Miravete anticline grew during the Jurassic and Early Cretaceous and was rejuvenated during Cenozoic shortening. Its evolution is separated into four halokinetic stages, including the latest Alpine compression. Regionally, the well-exposed Castel de Cabra salt anticline and Cañada Vellida salt wall confirm the widespread Jurassic and Early Cretaceous diapiric evolution of the Maestrat Basin. The NE flank of the Cañada Vellida salt wall is characterized by hook patterns and by a 500-m-long thin Upper Jurassic carbonates defining an upturned flap, inferred as the roof of the salt wall before NE-directed salt extrusion. A regional E-W cross section through the Ababuj, Miravete and Cañada-Benatanduz anticlines shows typical geometries of salt-related rift basins, partly decoupled from basement faults. These structures could form a broader diapiric region still to be investigated. In this section, the Camarillas and Fortanete minibasins displayed well-developed bowl geometries at the onset of shortening. The most active period of diapiric growth in the Maestrat Basin occurred during the Early Cretaceous, which is also recorded in the Eastern Betics, Asturias and Basque-Cantabrian basins. This period coincides with the peak of eastward drift of the Iberian microplate, with speeds of 20 mm/year. The transtensional regime is interpreted to have played a role in diapiric development.  相似文献